Please submit the form below.
We will respond with a Schedule!
Pricing for a foundation certification is $415 plus a travel fee, (if applicable). General turn-around time when ordered through Alati’s Inspection Service is typically 2 days. When order through the Engineering Firm turn-around times increase to 3 to 5 days (Engineering Firm has to contact Alati’s Inspection Service to confirm and accept the inspection request, then the Engineering Firm has to create and submit the order).
Payment:
- Credit/Debit Card paid to Hayman Engineering for the $415.00 (Billing
address required) Payment information required before inspection. - Personnel Check, Business Check or Cash to Alati’s Inspection Service
for applicable Trip fee. Travel fee if applicable is required at or
before the inspection.
24 hour Rush service available for those needing an inspection and
certification expedited as quickly as possible for an additional fee
(Please call for pricing).
Please note all the information needed and pricing to perform the Manufactured Home Foundation Certification is listed above. If you call with questions we will direct you back to the web site.
In addition to the Manufactured Home Foundation Certification Alati’s Inspection Service can provide a full Home Inspection at a discounted rate (Save $50.00) when you combined your Manufactured Home Foundation Inspection along with your Home Inspection!
HUD’s “Permanent Foundations Guide for Manufactured Homes” which is a design manual for foundations on manufactured homes. Engineers are required to certify compliance with this manual for existing construction. The practices recommended in the Handbook are not intended to be applied retroactively to existing sites unless the authority in the jurisdiction considers such application essential for safety and health of occupants. Upgrade of existing anchorages and footings shall meet the intent of the definition of permanent foundation stated herein.
The “intent” of the anchorage is to adequately tie the home down during expected wind and seismic events. The “intent” of the footing is to adequately support the weight of the home given soil load bearing conditions and frost depth requirements. It is important to choose an engineer who is very knowledgeable about the PFGMH standards. An engineer who is inexperienced in these standards could wind up costing your borrowers thousands of dollars in unnecessary upgrades.
Alati’s Inspection Service through the engineering firm of Hayman Engineering offers this service. We take the measurements perform the visual Inspection, fill out the required forms and upload the photos to Hayman Engineering who evaluates, calculates and issues the Manufactured Home Foundation Certification or recommend the Upgrade of existing anchorages and footings so that they meet the intent of the definition of permanent foundation stated.